Home / Guides / How to Choose a Ballistic Helmet

Guide

How to Choose a Ballistic Helmet

To choose a ballistic helmet, decide on four things: the cut (high cut FAST, mid cut ACH/MICH or full cut PASGT), the protection level (Level IIIA is standard), the weight you can wear comfortably, and the right size for your head circumference. Then check for rails, NVG shroud and a comfortable pad system.

1. Pick a Cut

Cut

Coverage

Headset room

Weight

Shop

FAST / High Cut

Low

Best

Lightest

ACH / MICH

Medium

Good

Medium

PASGT (full cut)

Highest

Poor

Heaviest

High cut vs full cut

a high cut trades ear and temple coverage for comfort and headset compatibility; a full cut gives the most coverage but is heavier and blocks headsets.

High cut and full cut ballistic helmets from the side

2. Understand Helmet Protection Levels

  • Level IIIA is the standard for ballistic helmets: it stops handgun rounds up to .44 Magnum and fragments.

  • "Level 3" or "Level 4" helmets that stop rifle rounds are rare, very heavy and expensive. A helmet sold as "Level 4" without a test report should be treated with caution.

  • Ask for the test report. Ours are on the certifications page.

3. Consider Weight and Material

Material

Typical weight (size L, IIIA)

Notes

Aramid

3.2–3.8 lb

Proven, heat tolerant

UHMWPE

2.6–3.0 lb

Lighter, stiffer

Hybrid

2.8–3.2 lb

Balance of both

A pound saved on your head makes a big difference after an hour.

4. Get the Right Size

Measure around your head just above the eyebrows and ears. Most adults fit M or L. See the helmet chart in our sizing guide. The helmet should sit level, about one finger above the eyebrows, with no wobble when you shake your head.

Adjusting the dial and pads for a proper helmet fit

5. Check the Features

  • Dial-fit retention and four-point chinstrap

  • Replaceable comfort pads

  • ARC side rails for lights and cameras

  • Front NVG shroud

  • Helmet cover options

FAQ

Is a bump helmet bulletproof?

No. Bump helmets protect against knocks only. Make sure the helmet is rated Level IIIA.

What's the best ballistic helmet for civilians?

For most people, a Level IIIA high cut or ACH helmet in UHMWPE offers the best balance of protection, weight and comfort.

Can I buy a helmet with a vest?

Yes. See body armor kits.