Factory-Direct Prices · Duties & Taxes Included · 30-Day Returns
Home / Guides / How to Choose a Ballistic Helmet
Guide
How to Choose a Ballistic Helmet
To choose a ballistic helmet, decide on four things: the cut (high cut FAST, mid cut ACH/MICH or full cut PASGT), the protection level (Level IIIA is standard), the weight you can wear comfortably, and the right size for your head circumference. Then check for rails, NVG shroud and a comfortable pad system.
1. Pick a Cut
Cut
Coverage
Headset room
Weight
Shop
FAST / High Cut
Low
Best
Lightest
ACH / MICH
Medium
Good
Medium
PASGT (full cut)
Highest
Poor
Heaviest
High cut vs full cut
a high cut trades ear and temple coverage for comfort and headset compatibility; a full cut gives the most coverage but is heavier and blocks headsets.
2. Understand Helmet Protection Levels
-
Level IIIA is the standard for ballistic helmets: it stops handgun rounds up to .44 Magnum and fragments.
-
"Level 3" or "Level 4" helmets that stop rifle rounds are rare, very heavy and expensive. A helmet sold as "Level 4" without a test report should be treated with caution.
-
Ask for the test report. Ours are on the certifications page.
3. Consider Weight and Material
Material
Typical weight (size L, IIIA)
Notes
Aramid
3.2–3.8 lb
Proven, heat tolerant
UHMWPE
2.6–3.0 lb
Lighter, stiffer
Hybrid
2.8–3.2 lb
Balance of both
A pound saved on your head makes a big difference after an hour.
4. Get the Right Size
Measure around your head just above the eyebrows and ears. Most adults fit M or L. See the helmet chart in our sizing guide. The helmet should sit level, about one finger above the eyebrows, with no wobble when you shake your head.
5. Check the Features
-
Dial-fit retention and four-point chinstrap
-
Replaceable comfort pads
-
ARC side rails for lights and cameras
-
Front NVG shroud
-
Helmet cover options
FAQ
Is a bump helmet bulletproof?
No. Bump helmets protect against knocks only. Make sure the helmet is rated Level IIIA.
What's the best ballistic helmet for civilians?
For most people, a Level IIIA high cut or ACH helmet in UHMWPE offers the best balance of protection, weight and comfort.
Can I buy a helmet with a vest?
Yes. See body armor kits.